Via Bluetooth - iOS

This article will assist you in connecting a Trackside Bluetooth QR Scanner to an iOS Bluetooth device.

Pairing issue? Hold down trigger for 8 seconds to force Bluetooth pairing. Keep holding until the QR scanner beeps.

If you need the full QR Scanner Connection Sheet, it's available in My Scanner Won't Connect by Bluetooth.

Want a different type of connection or having Bluetooth issues? See Via USB Dongle or Via Wired USB.

iOS:

Step 1 - Enter Settings

Enter Settings.

Step 2 - Select Bluetooth

Select Bluetooth

Step 3 - Ensure Bluetooth is Enabled

Ensure Bluetooth is Enabled

Step 4 - Scan Codes on Setup Sheet w/ Scanner

Use scanner to scan codes from top to bottom under Enable Bluetooth Scanning on page 1 of the Trackside QR Scanner Setup Sheet.

Step 5 - Select Scanner on Your Device

Select Barcode Scanner HID on the Bluetooth device. This will need to be done within a few seconds of scanning the QR codes on the Setup Sheet.

Step 6 - Listen for Pairing Complete Beep

Listen for pairing complete beep.

Note - On Screen Keyboard

On Screen Keyboard should disappear. Double pull scanner trigger to activate/deactivate on screen keyboard.

If these steps aren't working, there are additional troubleshooting steps in My Scanner Won't Connect by Bluetooth .